- MSRP: $3,150
- All Discounts: $285
- Sale Price: $2,865
- As Low As: 0 /mo Calculator
- Make: Mercury
- Shaft Length: 15"
- Horsepower: 9.9 HP
- Range (RPM): 5000 - 6000
Get More Information
About Mercury 9.9HP 9.9MH 15″ Shaft – Outboard Motor
The Mercury 9.9MH is a 9.9-horsepower FourStroke built on a 208cc twin-cylinder block, the full-power tune of the powerhead Mercury also rates at 8. Two cylinders keep it smooth at idle and through the midrange, and it’s carbureted with a rope start, twist-grip tiller, 15-inch short shaft, and a complete forward-neutral-reverse gearshift. It draws from an external fuel tank, weighs 88 lbs, and carries the sacrificial anodes and saltwater corrosion protection Mercury builds into its full line.
The 9.9 is the biggest motor a lot of small boats are rated for, and this one uses all of it, planing a light aluminum boat or pushing a loaded skiff through the mooring fields and island passages of Casco Bay. It also earns its keep as a kicker, trolling all day at a smooth idle where a single-cylinder motor would rattle. South Port Marine carries the 9.9MH in South Portland, so call (207) 799-8191, or the Danvers sales office at (978) 904-1924 on the North Shore.
Motor Features
| Model | 9.9MH |
| Make | Mercury |
| Recommended Transom Height (Inches) | S: 15 |
| Engine Type | In-Line Two SOHC 4-Valve Portable |
| Fuel Delivery System | Battery-Free Electronic Fuel Injection |
| No. Of Cylinders | V2 |
| Bore X Stroke Inches (MM) | 2.16 x 1.73 (55 x 44) |
| Maximum Output HP | 9.9 |
| Ignition System | CDI with Electronic Spark Advance |
| Alternator | Electric 12V 12A |
| Trim Position | 5 Tilt Pin Positions and Shallow Water Drive |
| Gear Ratio | 2.08:1 |
| Operating Range (RPM) | 5000 - 6000 |
| Shaft Length | 15" |
| Weight (lbs) | 88 |
| Controls | Tiller Handle |
| Trim & Tilt | Manual Trim |
| Standard Propeller | Prop 3x8-1/2x8-1/2 |