- MSRP: $3,445
- All Discounts: $315
- Sale Price: $3,130
- As Low As: 0 /mo Calculator
- Make: Mercury
- Shaft Length: 15"
- Horsepower: 15 HP
- Range (RPM): 5500-6000
Get More Information
About Mercury 15HP 15MH 15″ Shaft – Outboard Motor
The Mercury 15MH is a 15-horsepower FourStroke running a 333cc twin-cylinder block with electronic fuel injection, so there’s no choke and no priming, just a pull and it fires. That EFI also holds a steady idle and cleaner fuel burn than a carbureted motor, and the block is shared with Mercury’s 20, so it’s loafing at this rating. It starts on a rope, steers by twist-grip tiller with a 15-inch short shaft, shifts forward-neutral-reverse, feeds from an external tank, and weighs 105 lbs with saltwater anodes and corrosion protection throughout.
Fuel injection earns its keep on a cold morning at the ramp, when a carbureted motor wants coaxing and this one starts like it’s July. Fifteen horsepower planes a small skiff or jon boat with a load aboard, real working power for hauling traps or running the shoreline along the Maine coast. South Port Marine stocks the 15MH in South Portland, so call (207) 799-8191, or the Danvers office at (978) 904-1924 for the North Shore.
Motor Features
| Model | 15MH |
| Make | Mercury |
| Recommended Transom Height (Inches) | S: 15 |
| Engine Type | In-Line Two SOHC 4-Valve Portable |
| Fuel Delivery System | Battery-Free Electronic Fuel Injection |
| No. Of Cylinders | V2 |
| Bore X Stroke Inches (MM) | 2.4 x 2.24 (61 x 57) |
| Maximum Output HP | 15 |
| Ignition System | CDI with Electronic Spark Advance |
| Alternator | Electric 12V 12A |
| Trim Position | 6 Tilt Pin Positions and Shallow Water Drive |
| Gear Ratio | 2.15:1 |
| Operating Range (RPM) | 5500-6000 |
| Shaft Length | 15" |
| Weight (lbs) | 105 |
| Controls | Tiller Handle |
| Trim & Tilt | Manual Trim |
| Standard Propeller | Prop 3x9-1/4x9 |