- MSRP: $1,690
- All Discounts: $155
- Sale Price: $1,535
- As Low As: 0 /mo Calculator
- Make: Mercury
- Shaft Length: 15"
- Horsepower: 4 HP
- Range (RPM): 4500-5500
About Mercury 4HP 4MH 15″ Shaft – Outboard Motor
The Mercury 4MH is a 4-horsepower single-cylinder FourStroke on a 123cc block, the same powerhead Mercury uses through its 5 and 6 horsepower motors, so it’s understressed at this rating. It’s carbureted with a rope start, a tiller with twist-grip throttle, a 15-inch short shaft, and a full forward-neutral-reverse gearshift instead of the spin-around reverse on the smaller portables. An internal fuel tank handles short runs, and it hooks to an external tank when you want range, all in a 57-lb package that’s saltwater rated with sacrificial anodes.
Real reverse and an external tank connection make it a working motor, not just a getting-there motor, for a skiff poking around the Casco Bay islands or a heavier tender that needs more push than a 2.5 gives it. Since it still starts on a rope and needs no battery, it stays simple to own through a season of salt. South Port Marine carries the 4MH in South Portland, so call (207) 799-8191, or the Danvers sales office at (978) 904-1924 on the North Shore.
Motor Features
| Model | 4MH |
| Make | Mercury |
| Recommended Transom Height (Inches) | S: 15 |
| Engine Type | Single Cylinder 2-Valve Portable |
| Fuel Delivery System | Carburetor |
| No. Of Cylinders | V1 |
| Bore X Stroke Inches (MM) | 2.32 x 1.77 (59 x 45) |
| Maximum Output HP | 4 |
| Choke | Manual choke |
| Ignition System | CDI with Electronic Spark Advance |
| Trim Position | 6 Tilt Pin Positions |
| Gear Ratio | 2.15:1 |
| Operating Range (RPM) | 4500-5500 |
| Shaft Length | 15" |
| Weight (lbs) | 57 |
| Controls | Tiller Handle |
| Trim & Tilt | Manual Trim |
| Standard Propeller | Prop 3x7.8x7 |
Services Offered
Your Cart
Mercury 4HP 4MH 15" Shaft - Outboard Motor
$1,535