- MSRP: $1,095
- All Discounts: $296
- Sale Price: $799
- As Low As: 0 /mo Calculator
- Make: Mercury
- Shaft Length: 15"
- Horsepower: 2.5 HP
- Range (RPM): 5000 - 6000
Get More Information
About Mercury 2.5HP 2.5MH 15″ Shaft – Outboard Motor
The Mercury 2.5MH is a 2.5-horsepower single-cylinder FourStroke displacing 85cc, carbureted, with a rope start made easier by automatic decompression. It carries a tiller with 360-degree steering, a forward-neutral shift, a 15-inch short shaft, and an integral 0.3-gallon fuel tank, so there’s no external tank or wiring to deal with. At 41 lbs with a carry handle built in, it lifts onto a dinghy, inflatable, or small skiff by hand, and Mercury rates it for saltwater with sacrificial anodes and the same corrosion protection as its bigger outboards.
As a tender motor running out to a mooring in Casco Bay, or knock-around power on a small aluminum skiff along the Maine coast, it’s the kind of motor that spends the whole season in salt and off the stern of a bigger boat. Since it starts on a rope and carries its own fuel, it stows small and runs without a battery or a rigging job. South Port Marine stocks the 2.5MH in South Portland, so call (207) 799-8191, or reach the Danvers office at (978) 904-1924 on the North Shore.
Motor Features
| Model | 2.5MH |
| Make | Mercury |
| Recommended Transom Height (Inches) | S: 15 |
| Engine Type | Single Cylinder 2-Valve Portable |
| Fuel Delivery System | Carburetor |
| No. Of Cylinders | V1 |
| Bore X Stroke Inches (MM) | 2.16 x 1.42 (55 x 36) |
| Maximum Output HP | 2.5 |
| Choke | Manual choke |
| Ignition System | CDI with Electronic Spark Advance |
| Trim Position | 4 Tilt Pin Positions |
| Gear Ratio | 2.15:1 |
| Operating Range (RPM) | 5000 - 6000 |
| Shaft Length | 15" |
| Weight (lbs) | 41 |
| Controls | Tiller Handle |
| Trim & Tilt | Manual Trim |
| Standard Propeller | Prop 3x7-3/8x6 |